CINEGEARS MULTI AXIS WIRELESS FOLLOW FOCUS KIT

Price: $3,990.00
  • Battery: Lithium polymer batteries, over 20 hours
  • Channel: Three-channel
  • Compatibility: ARRI, RED, Sony, Canon, Nikon, Panasonic, etc.
  • Delay: Less than 10 milliseconds
  • Effective Control Distance: >60m(radius)
  • Frequency: 433MHz
  • Input Voltage: +12 V to 30V
  • Material: Aluminum
  • Speed Levels: 16
  • Item #: 1-202
  • Condition: New
* Marked fields are required.
*
*
*
*
*
*
*
Qty: *

 cinegears filmmaster

 

CINEGEARS MULTI AXIS WIRELESS FOLLOW FOCUS Kit(1-6 CHANNEL)


Description:

 

The Cinegears Multi Axis Lens Control System is the complete wireless lens control solution for your camera rig. This system includes a CinegearsMulti AxisWireless Hand Controller, a CinegearsWireless Receiver, 3x Cinegears Wireless Lens Motors, REC (start/stop) triggers for Arri, Sony, Lanc, Black Magic, Canon, and Red Epic cameras, and all the accessories you will need to use your kit right away. This kit comes in our waterproof hard case with foam inserts.

 

The CinegearsMulti Axis Wireless Hand Controller allows you to control your lens focus, iris, and zoom with precision from up to 100 meters away. Our controllers work with jib, Steadicam, MoVI, and Gamble stabilizer shots, allowing you to perform with precision without sacrificing the mobility of your cameras or the integrity of the shot. Four focus presets can be programmed and accessed with the press of a single button, and recording can be controlled with the integrated record button. Shoot continuously for up to 20 hours on a single charge with a quick-charge lithium battery.

 

The Cinegears Multi Axis Wireless Receiver drives up to 6 Cinegears Lens Control Motors, as well as providing REC (start/stop) control, Stereoscopic 3d filming support, and an option for wired control. The receiver mounts to your rig on a rail by quick clamp, and is powered using the 2-PIN1B to 2-PIN0B cable. Keep an eye on your parameters easily with a backlit LED screen. The receiver also has the option of being connected to the hand controller via a 4-pin lemo cable (included).

 

Any focus kit is only as good as its motors, which is why the Cinegears multi axis lens motors are help to strict performance benchmarks for noise, torque, and design. With a hidden antenna and reduced overall size compared to our single axis motors, the Cinegears multi axis lens motor does not compromise performance; motor power and transmission distances are the same. The motors laterally lock on to 19mm and 15mm rail systems, avoiding the need to remove your matte box and other rail accessories. With a built in receiver, remote record, and interchangeable gear heads (m 0.4 to m 1.0), the Cinegears Wireless Standard Motor is ideal for practically any lens setup imaginable.

 

The Cinegears Multi Axis Wireless Follow focus Kit delivers a complete solution to focus on your set!


 
The latest Multi Axis Kit had been upgraded with:
– All trigger functions built in, including SONY, CANON, ARRI and red epic
– An extended controller slider, and also uni-body design
– The power protection mode

 

 

Specifications:

SingleSpec_001

SingleSpec_001

- Length: 45cm
- Width: 35cm
- Height: 13cm
- Weights: 2950g
- Materials: Aluminum alloy, rubber and plastic

Cinegears Wireless Hand Controller

Dimensions Height (w/ antenna): 5.75″ (14.5 cm) Width: 2.75″ (7 cm) Depth: 2.75″ (7 cm)
Weight >1 lbs
Material Aluminum and Steel Alloy
Construction CNC Machined
Coating Black anodized coating
Operating Temperature 0°C to + 40°C (32°F to 104°F)
Storage Temperature –20°C to + 50°C (–4°F to 122°F)
Frequency 433 MHz RF
Supported Battery Type              Li iON Battery 5V
Required Battery Quantity One (1) Internal

Cinegears Lens Control Motor

Maximum Peak Torque 0.85 Nm
Maximum Speed 2.8 rev/second
Dimensions Height: 4.5″ (12 cm) Width: 1.25″ (3 cm) Depth: 2″ (5 cm)
Weight 0.77 lbs (350 g)
Material Aluminum and Steel Alloy
Construction CNC Machined 32-bit Control Chip
Coating Black anodized coating
Operating Temperature 0°C to + 40°C (-32°F to 104°F)
Storage Temperature -20°C to + 50°C (-4°F to 122°F)
Typical Operating Power Consumption     2.5w
Input Supply Voltage 12-28 V

Cinegears Wireless/Wired Receiver

Dimensions Height: 5.5” (13.5cm) Width: 4.5” (11.5cm) Depth: 3.5” (8.5cm)
Weight 0.88 lbs
Material Aluminum and Steel Alloy
Construction CNC Machined
Operating Temperature              0°C to + 40°C (32°F to 104°F)
Storage Temperature –20°C to + 50°C (–4°F to 122°F)
Frequency 433 MHz RF
Input Supply Voltage 12-28v
Coating Black Anodized Coating

 

                                       Itemized List
 
6channelmotorThumb 3 x CINEGEARS Wireless Lens Control Motor projectThumb6 1 x CINEGEARS Multi Axis Wireless Hand Controller
receiverThumb 1 x CINEGEARS Wired/Wireless Receiver 19mmThumb 3 x Motor Mounting Bracket 19mm Rail
ProjectThumb9 3 x 15mm-19mm Rod Bushings projectThumb7 3 x Gear Re-locator
productThumb4 2 x Thick Marking Disc Replacement prductThumb3 1 x Extra Gear with 0.5 Pitch and Teeth
prductThumb3 1 x Extra Gear with 0.6 Pitch and Teeth prductThumb3 1 x Extra Gear with 0.8 Pitch and Teeth
prductThumb3 1 x Extra Gear with 1.0 Pitch and Teeth projectThumb10 3 x Steel Gears with Each one of the Motor
projectThumb12 1 x 8cm Extended Bracket for 15mm Rod antennaTheme 1 x Detachable Antenna
7pinLemoThumb 3 x 7 Pin Lemo Motor Cable Projectthumb11 1 x Black Straight Power Tap Converter Cable
singleThumb4 1 x Powertap Converter Cable projectthumb13 1 x Water Proof Production Case with Foam Inserts

CINEGEARS Wireless Follow Focus Standard Kit Motor Test.

 

 

 

Reviews (0) Write a Review
No Reviews. Write a Review